Fleece Sublimation Baby Blanket

Fleece Sublimation Baby Blanket

Regular price
Sold out
Sale price
Unit price
Shipping calculated at checkout.


Supplies needed:
- sublimatable substrate (baby blanket)
- sublimation transfer
- scratch paper
- repositionable spray

Heat press settings:
- temperature - 400 degrees F
- dwell time - 1:00 to 1:15
- pressure - medium

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.

2nd Note: For best results the printer and press should be able to
accommodate a size larger than the substrate (9.25 x 14.25).

3rd Note: To adhere the transfer to the substrate use repositionable spray
on the transfer instead of heat tape.

Layer the press from the bottom pad to the top heat platen as follows:
1. scratch paper
2. substrate (baby blanket)
3. transfer
4. scratch paper

1. Spray the transfer with repositionable spray.
2. Position a piece of larger scratch paper underneath the substrate and
make sure that all areas of the press are clean or covered to prevent grease
and dirt from touching the substrate.
3. Place the substrate onto the press.
4. Position the transfer onto the substrate.
5. Place a large sheet of scratch paper over the transfer.
6. Press the items using the settings listed above.
7. Remove the transfer from the substrate and items from the press
immediately. Use heat resistant gloves if necessary - the items will be very

- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-20 seconds).
- If the final product appears yellowed reduce the dwell time slightly
(10-20 seconds).